Previous dayOctober 19, 2020Next day

Earthquakes on October 19, 2020

406
EARTHQUAKES on October 19, 2020
24-hour UTC period · USGS data
28 km deep · 321 people felt it
Elevated activity
compared to daily average (~250/day)

Magnitude Breakdown

M5.0+
14
M4.0–4.9
65
M3.0–3.9
53
M2.0–2.9
64
M1.0–1.9
210

Activity Summary

406
Total earthquakes
~250
Daily average
Elevated
Activity level
14
M5.0+ events

Earthquake Map — October 19, 2020

Map showing earthquake epicenter at 20.00°, 0.00°

All Earthquakes — October 19, 2020

Showing 30 of 196 (filtered from 406)
(Filtered to M2.0+. Change the magnitude filter to see smaller events.)
Time ↓Mag ↕Location ↕Depth ↕Felt ↕MMIAlertStatusDetails
2020-10-19
2020-10-19 23:56:45 UTC
3.8mb
99 km SSE of Sand Point, Alaska
54.568°, -159.697°
22.2 km---✓ ReviewedUSGS →
At 23:56 UTC on October 19, 2020, a magnitude 3.8 tremor occurred 99 km SSE of Sand Point, Alaska. It arrived roughly 3 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.8 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:54:14 UTC
3.3ml
116 km SSE of Sand Point, Alaska
54.415°, -159.632°
31.7 km---✓ ReviewedUSGS →
On October 19, 2020, worldwide seismic activity registered a magnitude 3.3 earthquake 116 km SSE of Sand Point, Alaska at 23:54 UTC. Coming 2 hours after a magnitude 5.9 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M3.3 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:52:22 UTC
3.4ml
110 km SSE of Sand Point, Alaska
54.465°, -159.680°
26.9 km---✓ ReviewedUSGS →
A magnitude 3.4 seismic event took place 110 km SSE of Sand Point, Alaska on October 19, 2020 at 23:52 UTC. It arrived roughly 3 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.4 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:50:13 UTC
2.7ml
101 km SE of Sand Point, Alaska
54.601°, -159.567°
23.0 km---✓ ReviewedUSGS →
October 19, 2020 brought a magnitude 2.7 earthquake 101 km SE of Sand Point, Alaska, logged at 23:50 UTC. This event falls inside the aftershock decay of a nearby magnitude 7.6 earthquake that occurred about 3 hours earlier. The event was offshore. See the M2.7 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:48:24 UTC
3.8ml
113 km SSE of Sand Point, Alaska
54.395°, -159.828°
19.8 km---✓ ReviewedUSGS →
The USGS recorded this magnitude 3.8 earthquake 113 km SSE of Sand Point, Alaska at 23:48 UTC on October 19, 2020. This event falls inside the aftershock decay of a nearby magnitude 5.9 earthquake that occurred about 2 hours earlier. See the M3.8 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:42:16 UTC
4.9mb
97 km SSE of Sand Point, Alaska
54.548°, -159.839°
33.3 km---✓ ReviewedUSGS →
At 23:42 UTC on October 19, 2020, a magnitude 4.9 tremor occurred 97 km SSE of Sand Point, Alaska. Coming 3 hours after a magnitude 7.6 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M4.9 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:41:02 UTC
4.5mb
109 km SSE of Sand Point, Alaska
54.468°, -159.696°
27.3 km---✓ ReviewedUSGS →
A magnitude 4.5 earthquake was recorded 109 km SSE of Sand Point, Alaska on October 19, 2020 at 23:41 UTC. This event falls inside the aftershock decay of a nearby magnitude 7.6 earthquake that occurred about 3 hours earlier. See the M4.5 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:40:34 UTC
2.6ml
89 km SSE of Sand Point, Alaska
54.660°, -159.729°
24.1 km---✓ ReviewedUSGS →
This magnitude 2.6 event was detected 89 km SSE of Sand Point, Alaska on October 19, 2020, with origin time 23:40 UTC. Coming 3 hours after a magnitude 7.6 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M2.6 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:38:54 UTC
3.8mb
94 km SE of Sand Point, Alaska
54.662°, -159.605°
52.8 km---✓ ReviewedUSGS →
This magnitude 3.8 event was detected 94 km SE of Sand Point, Alaska on October 19, 2020, with origin time 23:38 UTC. Coming 3 hours after a magnitude 7.6 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. The event was offshore. See the M3.8 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:38:19 UTC
3.5ml
115 km SSE of Sand Point, Alaska
54.420°, -159.660°
15.2 km---✓ ReviewedUSGS →
On October 19, 2020 at 23:38 UTC, a magnitude 3.5 earthquake struck 115 km SSE of Sand Point, Alaska. This event falls inside the aftershock decay of a nearby magnitude 5.9 earthquake that occurred about 2 hours earlier. See the M3.5 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:38:08 UTC
3.9mb
180 km SE of Sand Point, Alaska
54.333°, -158.293°
16.4 km---✓ ReviewedUSGS →
October 19, 2020 brought a magnitude 3.9 earthquake 180 km SE of Sand Point, Alaska, logged at 23:38 UTC. The event was offshore. See the M3.9 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:37:41 UTC
3.5ml
111 km SSE of Sand Point, Alaska
54.448°, -159.698°
21.3 km---✓ ReviewedUSGS →
A magnitude 3.5 earthquake was recorded 111 km SSE of Sand Point, Alaska on October 19, 2020 at 23:37 UTC. Coming 3 hours after a magnitude 7.6 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M3.5 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:34:17 UTC
3.1ml
131 km SSE of Sand Point, Alaska
54.251°, -159.691°
24.8 km---✓ ReviewedUSGS →
On October 19, 2020, worldwide seismic activity registered a magnitude 3.1 earthquake 131 km SSE of Sand Point, Alaska at 23:34 UTC. It arrived roughly 2 hours after a larger magnitude 5.9 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.1 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:30:26 UTC
3.5ml
90 km SSE of Sand Point, Alaska
54.655°, -159.724°
25.9 km---✓ ReviewedUSGS →
Seismographs logged a magnitude 3.5 earthquake 90 km SSE of Sand Point, Alaska with origin time 23:30 UTC on October 19, 2020. It arrived roughly 3 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.5 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:27:13 UTC
3.4ml
75 km SE of Sand Point, Alaska
54.778°, -159.817°
27.2 km---✓ ReviewedUSGS →
October 19, 2020 brought a magnitude 3.4 earthquake 75 km SE of Sand Point, Alaska, logged at 23:27 UTC. This event falls inside the aftershock decay of a nearby magnitude 3.9 earthquake that occurred about 2 hours earlier. The event was offshore. See the M3.4 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:26:18 UTC
3.4ml
111 km SSE of Sand Point, Alaska
54.436°, -159.755°
19.9 km---✓ ReviewedUSGS →
On October 19, 2020 at 23:26 UTC, a magnitude 3.4 earthquake struck 111 km SSE of Sand Point, Alaska. Coming 2 hours after a magnitude 5.9 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M3.4 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:23:46 UTC
3.1ml
90 km SE of Sand Point, Alaska
54.699°, -159.626°
20.0 km---✓ ReviewedUSGS →
At 23:23 UTC on October 19, 2020, a magnitude 3.1 tremor occurred 90 km SE of Sand Point, Alaska. This event falls inside the aftershock decay of a nearby magnitude 7.6 earthquake that occurred about 2 hours earlier. The event was offshore. See the M3.1 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:19:52 UTC
3.2ml
94 km SSE of Sand Point, Alaska
54.622°, -159.712°
20.1 km---✓ ReviewedUSGS →
At 23:19 UTC on October 19, 2020, a magnitude 3.2 tremor occurred 94 km SSE of Sand Point, Alaska. It arrived roughly 2 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.2 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:17:06 UTC
4.6mb
136 km SSE of Sand Point, Alaska
54.176°, -159.813°
10.7 km---✓ ReviewedUSGS →
On October 19, 2020, worldwide seismic activity registered a magnitude 4.6 earthquake 136 km SSE of Sand Point, Alaska at 23:17 UTC. Coming 2 hours after a magnitude 5.9 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M4.6 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:11:57 UTC
3.7mb
113 km SSE of Sand Point, Alaska
54.422°, -159.734°
29.7 km---✓ ReviewedUSGS →
Seismographs logged a magnitude 3.7 earthquake 113 km SSE of Sand Point, Alaska with origin time 23:11 UTC on October 19, 2020. Coming 1 hours after a magnitude 5.9 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M3.7 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:11:28 UTC
2.6ml
94 km SSE of Sand Point, Alaska
54.584°, -159.828°
18.0 km---✓ ReviewedUSGS →
Reports of a magnitude 2.6 earthquake 94 km SSE of Sand Point, Alaska came in on October 19, 2020 at 23:11 UTC. It arrived roughly 2 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M2.6 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:09:39 UTC
3.5ml
104 km SSE of Sand Point, Alaska
54.499°, -159.774°
21.9 km---✓ ReviewedUSGS →
On October 19, 2020, worldwide seismic activity registered a magnitude 3.5 earthquake 104 km SSE of Sand Point, Alaska at 23:09 UTC. This event falls inside the aftershock decay of a nearby magnitude 7.6 earthquake that occurred about 2 hours earlier. See the M3.5 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:07:50 UTC
3.2ml
85 km SE of Sand Point, Alaska
54.703°, -159.744°
22.2 km---✓ ReviewedUSGS →
The USGS recorded this magnitude 3.2 earthquake 85 km SE of Sand Point, Alaska at 23:07 UTC on October 19, 2020. This event falls inside the aftershock decay of a nearby magnitude 7.6 earthquake that occurred about 2 hours earlier. The event was offshore. See the M3.2 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:04:23 UTC
4.2mb
100 km SSE of Sand Point, Alaska
54.577°, -159.664°
26.9 km---✓ ReviewedUSGS →
At 23:04 UTC on October 19, 2020, a magnitude 4.2 tremor occurred 100 km SSE of Sand Point, Alaska. This event falls inside the aftershock decay of a nearby magnitude 7.6 earthquake that occurred about 2 hours earlier. See the M4.2 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:01:54 UTC
2.7ml
85 km SE of Sand Point, Alaska
54.762°, -159.619°
25.6 km---✓ ReviewedUSGS →
On October 19, 2020 at 23:01 UTC, a magnitude 2.7 earthquake struck 85 km SE of Sand Point, Alaska. Coming 2 hours after a magnitude 7.6 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. The event was offshore. See the M2.7 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 23:00:20 UTC
3.2ml
123 km SSE of Sand Point, Alaska
54.337°, -159.668°
20.1 km---✓ ReviewedUSGS →
This magnitude 3.2 event was detected 123 km SSE of Sand Point, Alaska on October 19, 2020, with origin time 23:00 UTC. Coming 1 hours after a magnitude 5.9 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M3.2 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 22:58:17 UTC
2.9ml
107 km SSE of Sand Point, Alaska
54.470°, -159.755°
19.7 km---✓ ReviewedUSGS →
Seismographs logged a magnitude 2.9 earthquake 107 km SSE of Sand Point, Alaska with origin time 22:58 UTC on October 19, 2020. It arrived roughly 2 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M2.9 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 22:57:19 UTC
3.2ml
95 km SSE of Sand Point, Alaska
54.611°, -159.706°
26.1 km---✓ ReviewedUSGS →
Reports of a magnitude 3.2 earthquake 95 km SSE of Sand Point, Alaska came in on October 19, 2020 at 22:57 UTC. It arrived roughly 2 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.2 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 22:56:35 UTC
3.1ml
89 km SSE of Sand Point, Alaska
54.595°, -159.944°
13.8 km---✓ ReviewedUSGS →
The USGS recorded this magnitude 3.1 earthquake 89 km SSE of Sand Point, Alaska at 22:56 UTC on October 19, 2020. Coming 2 hours after a magnitude 5.7 earthquake in the immediate vicinity, it is most likely an aftershock of that larger rupture. See the M3.1 event page for the full report, ShakeMap, and citizen-reported intensity data.
2020-10-19
2020-10-19 22:52:09 UTC
3.7ml
116 km SSE of Sand Point, Alaska
54.423°, -159.609°
29.4 km---✓ ReviewedUSGS →
On October 19, 2020, worldwide seismic activity registered a magnitude 3.7 earthquake 116 km SSE of Sand Point, Alaska at 22:52 UTC. It arrived roughly 2 hours after a larger magnitude 7.6 mainshock in the same 20 km area, placing it within the typical aftershock window. See the M3.7 event page for the full report, ShakeMap, and citizen-reported intensity data.
Legend:
Mag: Magnitude (magType = ml, mb, mw, etc.)
Felt: Number of DYFI felt reports
MMI: Modified Mercalli Intensity (I-X+)
Alert: PAGER alert level
Depth: Shallow (<70km), Intermediate, Deep (>300km)
Status: Auto = preliminary, Reviewed = verified by seismologist
Click any row to see additional technical details.

About This Page

This page shows all earthquakes recorded by the USGS Earthquake Hazards Program during the 24-hour UTC period on October 19, 2020. Data includes all events of magnitude 1.0 or greater. Past earthquake data is considered final after review by USGS seismologists.